Skip to main content

101 results for 'soft interface'

    Downdraft Sanding Station - Part 1(Post)

    As we have previously discussed in this blog, the ultimate purpose of finish sanding is to achieve a very consistent pattern of scratches. At any grit level, deeper scratches in the pattern will

    There’s Nothing Tacky about Microfiber Cloths(Post)

    Tack cloths have been around for a long time, initially consisting of waxes soaked into fabric, usually cheese cloth. Modern chemistry has improved the dust removal performance and reduced re

    How to Sand and Refinish Aluminum Wheels(Post)

    Maintaining the pristine condition of your car’s aluminum rims can feel as challenging as keeping your entire car clean. If you’ve kissed a curb or two or left some metal behind, you might be wonderin

    Sandpaper Grit Guide(Page)

    Grit number tells you how coarse or fine an abrasive is: the lower the number, the bigger the grain and the faster (and rougher) it cuts. The single most common sanding mistake is skipping grits —...

    True Grits(Post)

    To be honest, writing this blog every few weeks is a bit of a challenge. After all, we are a sanding supplies company. We want our company blog to be relevant to our customers, but frankly finding new

    How to Sand Epoxy Resin(Post)

    Working with epoxy resin can feel like melding glass to whatever shape suits your fancy. At the same time, even the most airtight molds can leave epoxy resin projects with sharp or rough edges. The go

    I Hate to Say It, But...(Post)

    After our recent post on pore filling through slurry sanding a reader mentioned that I had not covered the actual proceedure, and had only said: "in the same order and grit". Mea Culpa. I was unclear

    The Sanding Procedure(Post)

    ✨ What’s New in Our Sanding Guide Updated grit progression: New recommendations for sanding sequences based on wood type and finish goal. Surface inspection tip: Use low-angle lighting to detect impe

    How to Wet Sand - A Guide to Wet Sanding All Surfaces (Post)

    Sanding can improve the overall finish of objects made from several materials. However, choosing between dry and wet sanding processes can be tricky, especially if you’re not familiar with what’s invo

!